Menu
Cart 0

1999-2009 BMW 5 Series 6 Series 7 Series Z3 Series HU58 (EWS) Remote Head Key - FCC ID: LX8 FZV

RK-BMW-EWS2
  • $990
  • Save $5.09

Save to my Wishlist

Description:

P/N: BMW-RHK-01 FCC ID: LX8 FZV

Works On The Following Models: BMW 3-Series 1995-2007*
BMW 5-Series 1995-2007*
BMW 6-Series 1995-2007*
BMW 7-Series 1995-2001
BMW M3 1999-2006
BMW M5 2000-2003
BMW X3 2003-2009
BMW X5 2000-2006
BMW Z3 1996-2002
BMW Z4 2002-2009
BMW Z8 2000-2003
Buttons: Lock
Unlock
Trunk
OEM Part #(s): 8382328
Compatible FCC ID: LX8 FZV
LX8FZV
KR55WK47993
Compatible IC: BMW6955750
Battery: CR2025
Reusable: Yes (with new chip)
Cloneable: No
Chip: PHILIPS 44 / 7935
Test Blade: S7BW-P
Condition: New Aftermarket


* Overlap year on 2-track & 4-track keys & proximity - depending on model and trim level.

BMW Z3 - Key Remote Programming

Three methods to try:

Method 1:

1. Working from within the vehicle and with the doors shut

2. Turn ignition to position 1 and back to off within 5 seconds.

3. Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.

4. Release both buttons.

5. Doors will lock and unlock to show correct programming has occurred.

 

Method 2:

To do this procedure you need to have one working key and one key that needs to be programmed.

1) Get in and close all doors.

2) Turn on the ignition and turn off quickly. (No more than 5 seconds) to start the process. Next action must take place within 30 seconds.

3) Remove the 1st key.

4) Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.

5) Hold down the unlock button and press the lock button 3 times. Release the unlock button and the doors lock which confirms the operation.

6) Quickly repeat steps 4 & 5 for key #2 etc.

If it does not work, try doing the keys in opposite order. Key 2 then key 1, vs 1 then 2.

 

Method 3:

Alternate if you do not have a working remote

1. Turn key to position 1 five times very quickly 2. Remove key 3. Hold unlock button then press lock button 3 times, release unlock button.

4. If you have another key do the same button pressing within 30 seconds 5. Turn on ignition to finalize.

PLEASE NOTE: This programming procedure programs the remote control part of the key. Any transponder chip for the immobilizer (starting of car) will not be programmed and must be done by a specialist.


We Also Recommend

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods